A sump pump is a pump that is used to remove water that has accumulated in a sump basin, which is typically located in the basement of homes. It helps prevent flooding in the house and eliminates moisture and buildup that has accumulated in the sump basin. If you get a sump pump installed, you won’t have to worry about flooding or structural damage, mainly when significant rainstorms occur.

 

As basement flooding is a common problem in most homes, sump pumps are vital. Still, they need to be taken care of properly. Let’s discuss the steps you need to take to keep your sump pump clean.

 

7 Steps to Clean Your Residential Sump Pump

 

Follow these steps to clean your sump pump and protect your property:

 

1.   Disconnect the Sump Pump

 

Before you start cleaning the sump pump, make sure you disconnect it from the power supply. You’ll also want to disconnect any other accessories like the battery and alarm. It is crucial to disconnect all the electronics because water can be harmful to them, and you don’t want to ruin them. Disconnecting the pump is also essential if you’re going to prevent electric shocks.

 

2.   Remove the Pump from the Discharge Pipe

 

Once you have disconnected the sump pump, remove the pump from the discharge pipe and carefully undo the screws and fasteners. This will allow you to separate the pump and pipe. When disconnecting the pipe, use a disinfectant or vinegar to remove the debris if you notice any buildup. This will also ensure that mold growth doesn’t quickly return.

 

3.   Separate the Pump from the Pit

 

To make sure that the cleaning is done correctly, remove the sump pump from the pit. This is the best way to clean the pump effectively. If you need more room to clean the pump, wrap it up in a plastic sheet and move to a more spacious area. This way, you won’t have to spill any dirt on your carpets or rugs.

 

4.   Clean the Pump Properly

 

To clean the pump properly from the inside, use a sponge or warm, damp cloth. This way you can easily scrape out all the dirt and debris gathered inside. If you feel too much dirt inside, use a garden hose on full pressure to remove any buildup.

 

5.   Sanitize the Pump and Basin

 

After you have cleaned out the pump, the next step should be to sanitize the pump and basin. Make sure you sanitize all cracks and crevices to prevent mold growth.

 

6.   Use a Vacuum

 

After the cleaning is done, use a vacuum cleaner to remove the remaining water and debris inside the sump pump. Once you are done using the vacuum, don’t forget to empty the vacuum cleaner because leaving it full of dirty water can promote mold growth inside your appliance.

 

7.   Reconnect the Pump

 

The final step in your cleaning process should be to reconnect the sump pump and the sump pit. After that, attach the discharge pipe, add the screws, and plug the pump into the power supply. Turn on the power, and fill the basin with water to check if the pump is properly working.

 

Contact a Reliable Plumber for Your Drain Cleaning Needs

 

If you have an issue with clogged drains, it’s vital to contact a professional plumber immediately for help. Contact your local Pasadena drain cleaning service to schedule an appointment.